TX340—Operating Instructions D02
5/5
MODE OF OPERATION –
TIMER MODE
In Timer mode,
indicated. At the
end of countdown time period, the fire
turns off.
While
indicated, at the end of count-
down time period, the fire will remain pilot
flame.
Press and hold
to check the
timer mode set temperature.
Press
or
to change set
temperature.
To cancel thermostat function, press
to change set temperature to
--
.
There are individual set tempera-
ture memories for
,
and
, the flame height always default to
its last setting.
MISCELLANEOUS
Low Battery Indication
Low battery indicator
indicated.
Battery replacement
Battery replacement is recommended at the beginning of
each heating season. Do not use metal tools to remove bat-
teries. Using a metal tool could cause a short that may
damage the receiver.
Dexen Industries, Inc
9220 Norwalk Blvd
Santa Fe Springs, CA 90670
Tel: +1 5626998490
SLEEP MODE
While handset is idle for 1 minutes, it
will turn into sleep mode.
MODE OF THERMOSTAT –
SWING
In Set mode,
indicated. press
and hold
and
to enter
SWING setting.
Briefly pressing
or
button
to changes the range of SWING, idle
10 seconds or press
to confirm.
The THERMO mode on the trans-
mitter operates with TEMPERA-
TURE DIFFERENTIAL (also
called variation
“
SWING
”).
A lower SWING increases the
number of cycles so the room
temperature is updated more of-
ten which consume more battery
power. A higher SWING decreas-
es the number of cycles, so the
tolerance of ROOM temperature is
higher, but it lower consume from
battery.
While
℉
selected, default SWING
is 2
℉
. SWING range from ±2
℉
,
±4
℉
, ±6
℉
, ±8
℉
.
While
℃
selected, default SWING
is 1
℃
. SWING range from ±1
℃
,
±2
℃
, ±3
℃
, ±4
℃
.
