TX340—Operating Instructions D02
3/5
SYMBOL
Figure 1: Symbol Display
SETTING TEMPERATURE SCALE
After batteries installed choose Fahr-
enheit or Celsius from slide switch.
After setting the time and temperature
scale, actual temperature display on
standby screen.
CHILDPROOF
ON:
To activate press
and
buttons simultaneously. indicated
and the handset is rendered inopera-
ble include the off function.
To deactivate press
and
buttons
Wiring of valve and receiver must be completed be
-
fore starting ignition. Failure to do so could damage
the electronics.
⚠
WARNING
When pilot ignition is confirmed, main flame valve turn
on to maximum flame height.
SETTING THE ELECTRONICS CODE
(First time use only)
●
Slide the ON/OFF/REMOTE slide switch from OFF
to REMOTE mode.
(see Figure 2).
●
Press Pairing button, an acoustic signal and green
LED flashing. (see Figure 3).
●
Within the subsequent 10 second press
button
on the remote handset until you hear two (2) beep
confirming the code is set, receiver allow pairing up
to 3 remotes simultaneously.
Figure 2: Slide to REMOTE mode
Figure 3: Press receiver
’
s pairing button
