• Update Server
Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the
upgrade, do not turn off the power of the Network Camera. Attempt to access it again after
waiting five minutes or longer.
• Backup
Save the user defined Network Camera Settings to a user PC.
• Restore
Import and apply previously stored user-defined settings from a user PC
Note:
Backup and Restore can only be used on the same unit running the same firmware. This
feature is not intended for multi-configurations or for firmware upgrades.
7) Support
The support page provides valuable information on troubleshooting and contact information, should
you require technical assistance.
• Logs
The network Camera supports system log information. Click the System Log button to get the log
data.
• Update Server
-
Server Report:
Click the Server Report button to get the important information about the
server’s status and should always be included when requesting support.
-
Parameter List:
Click the Parameter List button to see the unit’s parameters and its
current settings.
65