AE & AWB
This page provides access to set the exposure and white balance of the network camera.
• Exposure Control
Configure the exposure settings to suit the image quality requirements in relation to lighting
consideration.
-
Mode:
Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto with DC-IRIS.
*
Automatic:
Automatically sets the amount of light detected by the DC-IRIS and AGC.
*
Hold Current:
Fixes the exposure at its current state.
-
Value:
Select a value in the drop-down list to tune the exposure. The default setting is 5.
- Enable Long Exposure:
Set this checkbox to activate the electronic shutter of the camera.
* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/8.
• White Balance Control
This adjusts the relative amount of red, green and blue primary color s in the image so th at the
neutral colors are reproduced correctly. The camera can be set to automatic ally adjust f or the
type of light and c ompensate for its color. Alternatively, the t ype of light source can be set
manually.
27