Network Camera
5
Mounting
Mounting Template
1.
Screw the bottom cover to the wall or ceiling by using the mounting screws provided with the
camera. Use the mounting template provided with the camera.
2.
Connect the external devices, network.
3.
Adjust the angle of the lens for the proper view angle. Refer to the
View
Angle
section below
for details.
4.
Adjust the focus.
5.
Match the mark beside the cable access hole of the bottom cover and the side cable access hole
of the dome cover, and then turn the dome cover clockwise to lock the dome cover to the
bottom cover.
WARNING: You might need to reinforce the wall or ceiling. If the wall or ceiling is
not strong enough to support the camera, the camera might fall damaging the camera
or causing injuries.
View Angle
Three-axis lens positioning is supported.
①
Rotation:
Adjusts the rotation angle. Move the rotation
base clockwise or counterclockwise.
②
Tilt:
Adjusts the tilt angle. Loosen the tilt adjustment screws,
move the lens up and down and tighten the screws to lock
the angle.
③
Pan:
Adjusts the pan angle. Turn the pan base clockwise or
counterclockwise.
