Revo PJL3211, Руководство пользователя

Страница: 8 / 16

1 lb. = 8 in.
+2 lb. = 12 in.
1 lb. = 8 in.
+2 lb. = 12 in.
4
Remove the quick-release camera plate from
the receiver mount.
5
Check that the side-to-side trim screw and
the fore-and-aft trim screw on the receiver
mount are at their respective start points—the
long screw controlled by the black knob on
the mounting platform, in each case, should
not extend past the sheath at the end of the
screw.
Note: The distance of the weight from the
camera affects the balance, and can be
adjusted using the horizontal and vertical
trim screw to open or close the arc of the
counterbalance hinge.
Note: When mounting a DSLR camera with a heavy lens attached (such as a telephoto or zoom lens), move the plate forward in the direction of the lens as a
starting point. When mounting a video camcorder, mount the plate so that it’s centered or slightly forward of the center of the camera as a starting point.
For purposes of balance, you can use any of the holes on the mounting plate for mounting the camera, in addition to the X slot.
1 lb. = 8 in.
+2 lb. = 12 in.