Revo PJL3211, Руководство пользователя

Страница: 11 / 16

1 lb. = 8 in.
+2 lb. = 12 in.
6
You may need to repeat each of these steps several times to achieve the
correct balance. When you have the correct balance, note the weight
you used, the distance that the counter balance hinge is open, and the
position of the quick-release plate on the mounting platform. Then, you
can easily use the same settings for every shoot.
Note: Once you’ve achieved optimal balance of your camera on the ST-
1000, you will be able to pan or tilt the camera while shooting. To pan
the camera, place the thumb of the hand supporting the ST-1000 on the
control ring directly above the hand grip and below the receiver mount.
Using your thumb, the knurled ring can be carefully turned to the left or
to the right to pan the camera. To tilt the camera, put your thumb firmly
against the bottom of the receiver mount between the two silver screws
at the back of the receiver mount and the knurled ring attached to the
bottom of the receiver mount. Apply pressure carefully to tilt the camera
as desired.
When you’re finished shooting, remove the camera and quick-release
plate from the stabilizer. If the stabilizer is placed on a flat surface with
the camera mounted, it could possibly cause stress or damage to the
camera.