3.10 Area Title
Enter a specific name on programmed angle between START and END. For the screen
below, when the camera points at an angle between 124.3
°
(PAN), 30.7
°
(TILT) to 359.5
°
(PAN), 45.4
°
(TILT), ABC will be displayed on the screen.
AREA TITLE SETUP
NUMBER : 01
TITLE : ABC
START ANGLE : 124.3 30.7
END ANGLE : 359.5 45.4
SWAP : OFF
SAVE AND EXIT(ESC TO CANCEL)
NUMBER
:01 - 16
TITLE
:up to 12 characters.
SWAP
: Swap the start point for the end point.
1 . Select the” NUMBER” and set the desired number by pushing the
Joystick
left or right.
2. To edit the title, follow the procedure of the auto scan above to edit titles.
3. Select “START ANGLE”. Hold down the
CTRL
key while selecting the start position using
the
Joystick
. Current panning position will be displayed. Release
CTRL
key to complete
the selection of the start position. Or Press
IRIS Open
then the “CTRL” displays. Move
the desired position. Press
IRIS Close
then the “CTRL” disappears. To adjust at the 0.1
degree interval, twist the
Joystick
at the pan field and the tilt field.
4. Select “END ANGLE.” Hold down the
CTRL
key while moving the Joystick to select the
end position. Release the
CTRL
key to complete the selection of the end position.
Or Press
IRIS Open
then the “CTRL” displays. Move the desired position. Press
IRIS
Close
then the “CTRL” disappears. To adjust at the 0.1 degree interval, twist the
Joystick
at the pan field and the tilt field.
5. Select “SWAP”. Set to ON, to exchange the start angle and the end angle.
6. Select Save and Exit and push the
Joystick
to the right or press
IRIS Open
. Press
ESC
or
IRIS Close
to exit the program without saving.
21
