Revo DCZ-200-GS, Руководство пользователя

Страница: 4 / 56

SEWING SPEED AND TURNING DIRECTION OF PULLEY
However the available highest sewing speed is 6,500 s.p.m., from the view point
of durability of machines, it is preferable to operate at the economical speed of
6,000 s.p.m. after the initial operation at 5,000 s.p.m. in 200 hours
approximately -- one month.
LUBRICATION
Lubricant.
CASTROL'S PERFELTD T-46 is recommendable.
Feeding of Oil
At the time of Despatch, the oil will have been drained completely from the
machine, So, it should be filled with Clean Oil to the Upper line of Oil Gauge (A)
removing Screw at the mark "OIL"
Note : At the beginning of operation of brand-new machines or the re-use of
machines rested long time, Clean Oil must be fed around Needle Guard and
Upper Looper Bar additionally.
Oil Gauge and Confirmation of Oil Flow
Check Oil Guard everyday before operation replenish clean oil if the surface of oil
is below the under line. At the beginning of operation, confirm that the oil is
flowing smoothly out of Oil Sight Nozzle (B) inside machine.
Exchange of Oil
To keep the machine's life long time, oil for new machine must be exchanged
completely with new one after the initial operation of about 250 hours, And, after
the above , it must be exchanged in 2- 3 times every year, Exchange of Oil shall be
made according to the following order.
(1) Remove V-Belt from Motor Pulley and take out machine-head to top face of
the Table.
(2) Remove Belt Cover (A)
(3) Drain the Oil from machine loosening Drain Hole Screw (B) and (C)
A
SF
. OIL
B
A
B
C
2