Revo 0211T4FD, Быстрое руководство

Страница: 6 / 16

5
devices again. Choose one of the following methods as needed.
NOTE!
The following methods are also applicable if you pair a camera not in the kit with
the NVR.

One-Click Pair
1.
Connect the camera and the NVR to the same switch (or connect the camera to
the NVR with a network cable), and connect the devices to power.
2. Right-click on the NVR and then choose Menu > Network > Wi-Fi AP .
3.
Press the RESET button on the back of the camera to restore factory default
settings.
NOTE!
The reset button only works in 1-10 minutes after the camera is powered on. If you
fails to press the button within the time range, you need to power off the camera
and then on again to restore the defaults.
4.
Click One-Click Pair .
NOTE!
This function works within 3 minutes after the camera restores defaults. So, if the
camera is not paired successfully within this time, please restart the camera or try
other methods.
5. Wait for the camera to get online.

QR Code Pair
1.
Connect the camera to power.