Revo 0211T4FD, Быстрое руководство

Страница: 4 / 16

3
IPC Interfaces
5
Device Operation
5.1
Startup and Shutdown
Make sure the cables are connected correctly and the device is grounded properly.
Use a power supply that meets requirements.
5.1.1 Startup
Connect the devices to power to start up the devices.
5.1.2 Shutdown
Click > Shutdown on the screen toolbar in live view page.
CAUTION!
Do not disconnect power when the NVR is operating or shutting down.
5.2
Wi-Fi Configuration
The camera will get online and start live view on the NVR once the NVR and camera
are connected to power. Follow the steps to change Wi-Fi settings.
1.
Right-click on the NVR and then choose Menu > Network > Wi-Fi AP .
2.
Change settings as needed:
IP
Network
Network
interface
Power
interface
Antenna
SD card