Reverse Tap RT 3000, Руководство пользователя

Страница: 7 / 7

- You can pour beverage by pulling or pushing the plastic tap back and
forth.
5.
※ After ReverseTap Beer Tower is used, it is recommended to
disassemble each part and wash them in clean water.
- To assemble the beer pipe assembly to the tap assembly, align the center of silicone cap and
the extruded pin of the tap body and press the beer pipe assembly down to the tap assembly
to the end.
4.
- We recommend users to disassemble, wash in clean water, and keep ReverseTap Beer
Tower after its use. ( Refer to “
How to disassemble ReverseTap Beer Tower
” )
- ReverseTap Beer Tower is dishwashable within 80℃ water temperature.
- Do not use scrubs of polishing powders with rough surfaces for washing.
※ How to wash RA CR1 (silicone cap)
- Rub silicone cap softly in a diluted neutral detergent with warm water and then rinse
with clean water.
- Use of dishwasher is possible with good drainage tools such as net shaped container.
- After washing, gently shake off or tap onto a clean dry towel to dry.
- For more detailed demonstration, watch uploaded video clip on ReverseTap website.
How
to w
as
h
Rev
er
seT
ap
B
eer
T
ow
er
3.
- After the beverage filling is complete, disassemble the Tower from the
dispenser safely.
- It is easier to disassemble if you grab the upper part of the beer pipe
and disassemble in a manner of pulling or pushing it back and forth.
H
ow
to
use
Rev
er
seT
ap
Beer
T
ow
er