CUSTOMER SERVICE: 800-973-8374
10
Frame Assembly Instructions
IMPORTANT UNPACKING INSTRUCTIONS
To avoid damage to the power base, always
open the carton while the power base is
OPEN FLAT
STEP 1
STEP 3
STEP 4
STEP 5
STEP 6
STEP 2
Carefully lift the power base unit out of the
shipping carton, keeping the unit top side
down. For safety reasons, this should be
performed by 2 people. Use a protective barrier
Untie and extend the power cord from the
frame.
Remove the plastic packaging from the power
base.
Carefully rotate the power base over to the
topside-up position, resting on all four legs.
Plug the power cord into a grounded electrical
outlet.
Assembling power base legs: Open the
accessories box, take out the 4 legs,
and thread them in a clockwise direction
into the threaded holes in the frame.
NOTE: Tighten the legs securely to the frame.
Leave no space between the leg and frame.
NOTE: An electrical surge protection unit is
recommended (not included)
WARNING:
POWER CORDS MUST NOT INTERFERE
WITH ANY POWER BASE MECHANISMS.
ATTENTION!
Improper handling
DO NOT
lean the power base
against the installed