HEAD AND FOOT
ADJUSTMENTS (A,C)
Adjusts the head and foot sections
to the desired positions.
FLAT (B)
Returns both head and foot to the
flat position.
A. RAISE & LOWER HEAD SECTION
C. RAISE & LOWER FOOT SECTION
B. RETURN TO FLAT
Remote Control Operation Guide
NOTE: This power base
may have minor intermittent
performance due to RF
Interference. This is a normal
operation of the power base and
is not a defect.
ADDITIONAL REMOTE
FEATURES:
•
Customers can control the
remote without facing the
receiver (best transmission
range is within 30 feet or 10
meters).
•
This Base uses a RF (Radio
Frequency) remote control
system.
•
The included remote is already
paired with your power base,
so should be operational right
out of the box. Please test
some of the features to ensure
functionality.
•
Only replacement remote
controls require pairing
instruction on following pages.
If you find that your remote is
not paired with the bed, please
follow those Bluetooth pairing
instructions.
NOTE:
Please remember to recycle all
electronics.
NOTE: This device complies with
part 15 of the fcc rules. Operation
is subject to the following two
conditions: (1) This device may
not cause harmful interference
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.
NOTICE: Changes or
modifications not expressly
approved by the party responsible
for compliance could void the
user’s authority to operate the
equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure
compliance requirements, no change
to the antenna or the device is
permitted. Any change to the antenna
or the device could result in the
device exceeding the RF exposure
requirements and void user’s authority
to operate the device.