6.
CONTROLS
Usage of automatic control dedicated to the air curtains HUMMER gives great
possibilities to adjust the efficiency of the curtain, in various ways, to automate
its operation. We offer the following controls:
is used to adjust the operation of curtains HUMMER series, which are equipped
with three-speed fans. It is an advanced driver with many functions i. e. operation
in thermostatic mode (heating or cooling) or in accordance with door sensor,
valve operation control, selection of the fan speed. It is also possible to integrate
the device with the BMS building control system (using the MODBUS
communication protocol).
Voltage/ Frequency:
230 V AC / 50 – 60 Hz
Maximum current:
5 A
Operating temperature range:
0 - 45°C
Regulation range:
5°C - 35°C
Regulation accuracy:
± 0.5°C
Communication:
RS485
Dimensions:
86 x 86 x 13.3 mm 270 g
Degree of protection (housing):
IP 20
is used to automatically regulate the flow
of the heating medium
.
Voltage / Frequency:
230 V AC / 50 – 60 Hz
Power consumption:
2 VA
Kvs coefficient:
6.3 m³/h
Stroke:
3 mm
Operating condition of actuator:
-5ºC - 60ºC
Running time:
3 - 5 min
Degree of protection:
IP 54
is used to automatically regulate the flow
of the heating medium.
Power supply/ Frequency:
230 V AC/ 50 – 60 Hz
Power consumption:
7 VA
Kvs coefficient:
6
.
5 m³/h
Operating condition of actuator:
0 - 60ºC
Running time (motor):
18 s
Running time (return spring):
5 s
Degree of protection:
IP 20
allows to connect a receiver with higher current consumption than permissible
current load of connected regulator.
Power supply/ Frequency :
230 V AC / 50 – 60 Hz
Maximum rated current:
16 A
Input
:
NO/COM
Input
:
SL Connection of a regulator
with the voltage relay 230 V
Dimension
:
47 x 47 x 20 mm
Programmable controller
HMI CURTAIN
Two-way valve with actuator HC 3/4"
Three-way valve with actuator HC 3/4"
Relay Module RM-16A
Содержание HUMMER 150C-1P
Страница 8: ......
Страница 10: ...Warranty card...
