REVENTON FARMER HCF IP54-3S, Техническая документация инструкция

Страница: 6 / 18

7. CONNECTION SCHEMES
LEGEND:
1. Power
2. Main switch, overcurrent circuit breaker*
3. Air water heater FARMER HCF IP54-3S
4. 3-stage speed controllers with thermostat
A-work in continuous mode
B-operation in thermostatic mode
5. Valve with actuator HC ¾ "
6. Fan speed controller HC
7. Manual thermostat HC
8. Programmable controller HMI
9. Relay module RM-16A
10. External temperature sensor
11.Air water heater FARMER HCF IP65
* main switch and safety fuses are not included in the set
Three-way valve with actuator HC 3/4"
Relay Module RM-16A
is used to automatically regulate the flow of the heating medium.
Power supply/ Frequency: 230 V AC/ 50 – 60 Hz
Power consumption: 7 VA
Kvs coefficient: 6 . 5 m³/h
Operating condition of actuator: 0 - 60ºC
Running time (motor): 18 s
Running time (return spring): 5 s
Degree of protection: IP 20
allows to connect a receiver with higher current consumption than permissible
current load of connected regulator.
Voltage/ Frequency: 230 V AC / 50 – 60 Hz
Maximum current: 16 A
Input: NO/COM
Input: SL Connection of a regulator
with the voltage relay 230 V
Dimension: 47 x 47 x 20 mm
Manual thermostat HC
controls operation of the heater. Switches the unit off automatically
when the set temperature is reached.
Zasilanie / Częstotliwość: 230 V AC / 50 – 60 Hz
Maksymalne natężenie: 3 A
Zakres pracy: 0 - 40°C
Zakres regulacji: 10 - 30°C
Dokładność regulacji: <1°C
Stopie ń ochrony obudowy: IP 30
HC 3 A
HC 5 A
HC 7 A
2
1
4
2
6
3
HCF IP54-3S
HCF IP65
HMI
HC3S
2
-
4
-
HC 14 A
RM- 16 A
12
7
14
8
COOPERATION OF CONTROLLERS WITH EQUIPEMENT
HC 1.2 A
1
-