R.55 Phone User Manual
-23-
product certification for use when properly worn on the body
is 1.050 W/kg and for head is 0.542 W/kg. Simultaneous RF
exposure is 1.171W/Kg.
. This device was tested for typical body-worn operations
with the back of the handset kept 10mm from the body.
To maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 10mm separation distance
between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The
use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should
be avoided.
If you are using another accessory ensure that whatever
product is used is free of any metal and that it positions
the cellphone at least 10 mm away from the body
5.3 Industry Canada Notice
Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le
présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication
satisfaisante.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
