REVELL F206 Скачать руководство пользователя страница 13

HARMAN International Industries, Incorporated 

8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2012 HARMAN International Industries, Incorporated. All rights reserved.
Revel and the Revel logo are trademarks of HARMAN International Industries, Incorporated, 

registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
For questions, assistance or additional information concerning any of our products, call us 

at: (516) 594-0300 or (888) 691-4171. For technical support, submit your detailed inquiry 

to:[email protected]
Part No. REVP4411 Rev: A

Limited Warranty

A valid serial number is required for warranty coverage. This Revel 

warranty protects the original retail purchaser for a period of five 

(5) years (parts and labor) from any failure as a result of original 

manufacturing defects so long as:
1.  The Revel products were purchased within the 50 United States, its 

territories or Canada.

2.  The dealer from whom the Revel products were purchased was 

authorized to sell such products at the time of the original purchase.

3.  The original, dated Bill of Sale is presented whenever service is 

required during the warranty period.

The balance of this warranty is transferable only if the used product is 

purchased from an authorized Revel dealer. This warranty is only valid 

for service within the United States, its territories and Canada; please 

contact an authorized Revel dealer for warranty and service information.
Any Revel product not performing satisfactorily may be returned to 

the factory for evaluation. Return authorization must first be obtained 

by either calling or writing Customer Service prior to shipping the 

product. The customer is responsible for shipping charges to the 

factory. Customer Service will pay return shipping charges within the 

United States only in the event that the product is found to be defective 

as mentioned above. There are other stipulations that may apply to 

shipping charges.
There is no other express warranty on this product. Neither this 

warranty nor any other warranty, express or implied, including implied 

warranties of merchantability and fitness, shall extend beyond the 

warranty period. No responsibility is assumed for any incidental or 

consequential damages, so that the above exclusion or limitation may 

not apply.
This warranty provides specific legal rights. Other states may provide 

additional rights. This warranty is applicable in the United States, its 

territories and Canada. Outside of the United States, its territories and 

Canada, please contact an authorized Revel dealer for warranty and 

service information.
The information this document contains is subject to change without 

notice. In the event that there are differences between this warranty 

and the provisions of any advertisements, documentation, product 

brochures or packaging cartons, the terms of this warranty will prevail.

www.revelspeakers.com

Содержание F206














Отзывы: