8
After completing the electrical connection at the mounting bracket terminal block, cover the mounting
bracket with the ceiling canopy. Ensure all electrical wiring is tucked inside the canopy and that the
wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws
provided. Do not overtighten the screws as this will misalign the canopy potentially causing unwanted
noises. For best results, leave screws 4-5mm from mounting bracket and position canopy into the key
lock slot.
FAN WALL CONTROL (typical installation, plate and light switch not supplied)
Turn on the power and check the operation of the fan.
• OFF Position – Fan off
• 3rd Position – Low fan speed
• 2nd Position – Medium fan speed
• 1st Position – High fan speed
Light Control (not supplied)
• Switch – On/off (if applicable)
FINISHING
THE INSTALLATION
USING YOUR
CEILING FAN
ALBANY fan instructions_Sept20.qxp_Layout 1 21/9/20 4:34 pm Page 8
