5
BLADE ATTACHMENT
1. Lift up the cover ring (1) on the top motor housing (2) by hand. This will allow access to the three
blade mounting screw holes.
2. Insert the blade (6) into the side slot of fan motor assembly (5).
3. Align the three mounting holes on the blade to the three mounting holes on the blade mounting
bracket and using the blade screws & flat washers (3, 4), secure the blade to the fan motor assembly,
ensuring they are tightened equally and evenly.
Take care not to over tighten as this can damage
the blades.
4. Once completed, repeat the process for the remaining blades.
5. Reposition the cover ring (1) onto the top motor housing (2).
LIGHT KIT INSTALLATION
NOTE: FOR FAN MODELS WITHOUT LIGHT, IGNORE THIS STEP.
1. Install your chosen E27 globes into the lamp holders by screwing into place. Do not overtighten.
Do not exceed the maximum wattage of 15 watts per lamp holder. Energy saving LED globes must
be used with this product.
2. Install the glass shade by carefully pushing the glass into place ensuring you are engaging all three
tension clips. Before pushing into place, ensure your chosen globes have enough clearance between
the glass and the globe.
BLADE
INSTALLATION
ALBANY fan instructions_Sept20.qxp_Layout 1 21/9/20 4:34 pm Page 5
