Returnstar Interactive Tech IQTOUCH, Руководство пользователя

Страница: 3 / 14

Notices
Thanks for purchasing our IQ product. This product has been tested before shipping, but incorrect
using may lead to
fi re hazard. For safety, please read these instructions completely before using the
equipment.
- Be strictly adhered to all instructions when operating the product, whichhas dangerous high voltage
inside the product.
- Only use attachments/accessories specified by the manufacturer.
Safety Instructions:
- Protect the power cord from being tread upon or pinched otherwise it may cause hazard.
- Please keep your hands dry when unplug the power cord from the outlet.
- Keep the device away from over-heated, over-cooled or damp environment, and don’t place the
device under direct sunshine.
- Holes on the casing are designed for ventilation and heat dissipation. To gain fully ventilation, please
always keep at least 10cm clearance between the wall and equipment.
- Please do not install the product in embedded facility unless there is good ventilated device.
- Please place this product on flat ground to prevent from falling and damaging.
- Operate your device only from the type of power source indicated on the marking label. Thisdevice
only works for AC 220~240v
- Do not overload power outlets and extension cords because this can result in a risk of fi re orelectric
shock.
- Unplug this device from the power outlet and ask qualified technician under the following conditions:
- The power cord is damaged or abrasion.
- Fall from high place or case damage.
- Foreign stuff or liquid fall into the machine
- Unusual sound, smell etc.
- Abnormal phenomenon during using.Machine fails to work after operating by instruction.
- Replacement parts
When replacement parts are required, make sure that the replacement parts specified by the
manufacturer that have the same characteristics withprevious one.
- Transit
When a cart is used for product transit, please pay attention to protect the screen panel. Avoid
damage from falling down caused by over-brake and over-force.
- Cleaning
Unplug your machine before cleaning.Do not use liquid or chemical cleaners. A damp clothis suggested
to clean the exterior of your machine.The screen panel must be cleaned with soft wet cloth and alcohol,
solvents, or ammonia liquid isbanned.
- Environment
The screen image quality may become poor when the device is removed from low to high temperature
environment or screen face to the air-conditioner.Be sure to make the fog evaporated before using.
2/10