Retsch RS 300 Скачать руководство пользователя страница 8

Страница: 8 / 49

Notes on the manual

1.3 Explanations of the Safety Instructions

The following

warnings

in this manual warn of possible risks and damage:

DANGER

D1.0000

Risk of fatal injuries

Source of danger

−

Possible consequences if the danger is ignored.

•

Instructions and information on how to avoid the risk.

Fatal or serious injuries

may result if the “Danger” sign is disregarded. There is a

very high

risk

of a life-threatening accident or lasting personal injury. The signal word

DANGER

additionally used in the running text or in instructions.

WARNING

W1.0000

Risk of life-threatening or serious injuries

Source of danger

−

Possible consequences if the danger is ignored.

•

Instructions and information on how to avoid the risk.

Life-threatening or serious injuries

may result if the

“Warning” sign is disregarded. There is

increased risk

of a serious accident or of a possibly fatal personal injury. The signal word

WARNING

is additionally used in the running text or in instructions.

CAUTION

C1.0000

Risk of injuries

Source of danger

−

Possible consequences if the danger is ignored.

•

Instructions and information on how to avoid the risk.

Average to slight injuries

may result if the “Caution” sign is disregarded. There is an average

or slight risk of an accident or personal injury. The signal word

CAUTION

is additionally

used in the running text or in instructions.

NOTICE

N1.0000

Type of damage to property

Source of the damage to property

−

Possible consequences if the information is ignored.

•

Instructions and information on how to avoid the damage to
property.

Содержание RS 300


















































Результаты поиска

Содержание RS 300

Отзывы:

Похожие инструкции для RS 300

Бренды по названию

Популярные бренды

Retsch RS 300, Руководство пользователя

Результаты поиска

Содержание RS 300

Отзывы:

Похожие инструкции для RS 300

Бренды по названию

Популярные бренды