Retsch GRINDOMIX GM 200, Руководство по эксплуатации

Страница: 29 / 44

Operating the machine
29
The LED over the button lights up. The set speed is shown in the display if it is not
larger than 4000 rpm.
•
Press the START button.
Grinding now takes places in the interval mode.
•
To end interval grinding press the interval button ( E11 ) once again.
The LED above the interval button goes out and the speed maintains the value of
4000 rpm. The device is in continuous mode again .
Pos : 8. 50 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Revers e - Ver mahl ung @ 3\ mod_1279717723614_9.doc @ 21493 @ @ 1
5.14 Reverse grinding
Pos : 8. 51 /00010 Bedi enungsanleit ung en Kapitels ammlungen/ GM200 (2010)/ 0015 GM200N Bedienung/ 1580 GM 200_2010 Mo dul Revers e - Ver mahl ung @ 3\ mod_1279722273044_9.doc @ 21676 @ @ 1
•
Press the REVERSE button ( E10 ).
Fig. 11: Switching on interval operation
The LED above the REVERSE button lights up.
•
Press the START button.
Grinding takes place in reverse mode and the motor runs against the cutting
direction. Grinding takes place by impact unlike normal mode (cutting).
•
Press the REVERSE button ( E11 ) to leave the reverse mode again.
The LED above the REVERSE button lights up. The device is in normal mode once
again
– grinding by cutting .
Pos : 8. 52 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Q uic k St art - T as tenf unktion @ 1\ mod_1240313233592_9.doc @ 8229 @ 2 @ 1
Pos : 8. 53 /00010 Bedi enungsanleit ung en Kapitels ammlungen/ GM200 (2010)/ 0015 GM200N Bedienung/ 1585 GM 200_2010 Modul Q uic k St art - T ast enf unktion @ 3\ mod_1279722273888_9. doc @ 21685 @ @ 1
•
Press the QUICK button ( E12 ).
Fig. 12: QUICK grinding
The LED above the button lights up and grinding starts immediately.
•
Release the QUICK button, grinding is ended immediately and the LED
above the button goes out.
Pos : 8. 54 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Speicher – F unktionen @ 3\mod_1279718043115_9.doc @ 21517 @ @ 1
E12
E10