Retsch GRINDOMIX GM 200, Руководство по эксплуатации

Страница: 12 / 44

Technical data
12
Pos : 7. 1 / 00005 Übersc hrift en/1. Übersc hrift en/1 Tec hnisc he Dat en @ 0 \ mod_1222344525522_9. doc @ 2407 @ 1 @ 1
4 Technical data
Pos : 7. 2 / 00005 Übersc hrift en/1. 1 Ü berschrif ten/ 1. 1 Ü bers chrift en BDA/ 11 Eins atz der M asc hine bei besti mmungsgemäß er Ver wendung @ 0\ mod_1226476732248_9. doc @ 3243 @ 2 @ 1
4.1 Use of the machine for the intended purpose
Pos : 7. 3 / 00004 War nhi nweis e/ V0003 VORSICHT Expl osi ons- oder Brandgef ahr Si eben @ 1\ mod_1243924323407_9. doc @ 10360 @ @ 1
CAUTION
Risk of explosion or fire
Changing sample characteristics
–
Note that the characteristics and accordingly the danger presented by a
sample can change during sieving.
•
Do not sieve any potentially explosive or combustible materials in
this device.
Pos : 7. 4 / 00004 War nhi nweis e/ V0005 VORSICHT explosi onsg ef ärdet e At mosphär e @ 1\ mod_1239868668923_9.doc @ 8140 @ @ 1
CAUTION
Risk of explosion or fire
–
On account of its design, the device is not suitable for use in hazardous
(potentially explosive) atmospheres.
•
Do not operate the device in a hazardous atmosphere.
Pos : 7. 5 / 00004 War nhi nweis e/ V0006 VORSICHT Gefahr von Personens chäden Gefährliche St off e @ 1\ mod_1236238456269_9. doc @ 7634 @ @ 1
CAUTION
Danger of personal injury
Dangerous nature of the sample
–
Depending on the dangerous nature of your sample, take the
necessary measures to rule out any danger to persons.
•
Observe the safety guidelines and datasheets of your
sample material.
Pos : 7. 6 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/GM 200 ( 2010)/0005 GM200N T ec hnisc he D at en/0510 GM200_2010 M odul Eins at z bei besti mmungsgemäßer Verwendung @ 3\ mod_1279702720657_9. doc @ 20888 @ @ 1
Target group : operators
Machine type designation : GM 200
This device is suitable for analytical grinding, homogenisation and mixing of soft to
medium-hard, aqueous, fatty, fibrous and dry materials in seconds. This device is
designed for quantities of approximately 700ml, large volume materials up to
1000ml.
The feed size is < 30 - 40 mm.
The device is specially designed for the grinding of the following materials :
Fish, meat, vegetables, cheese, preserves, seeds, bacon, sausage, dry baked
goods and pastries, all aqueous, fatty and fibrous products and similar materials.
The device is designed as a laboratory device for 8-hour one-shift operation with a
30% ON duration.
It is not intended for use as production machine and not intended for the mixing
and homogenisation of liquids with low viscosity (emulsions and suspensions) .