Retsch GM 200, Руководство пользователя

Страница: 17 / 60

Packaging, Transport and Installation
17
4.3 Temperature Fluctuations and Condensation
NOTICE
N6.0016
Damaged components due to condensation
Temperature fluctuations

The device may be exposed to substantial fluctuations in temperature
during transport. The ensuing condensation can damage electronic
components.

Wait until the device has acclimatised before putting it into service.
Temporary storage:
Also in case of an interim storage the device must be stored dry and within the specified
ambient temperature range.
4.4 Conditions for the Installation Site

Installation height: max. 2
000 m above sea level

Ambient temperature: 5 °C
– 40 °C
NOTICE
N7.0021
Ambient temperature
Temperatures outside the permitted range

Electronic and mechanical components may be damaged.

The performance data alter to an unknown extent.

Do not exceed or fall below the permitted temperature range (5 °C to
40 °C ambient temperature) of the device.

Maximum relative humidity < 80 % (at ambient temperatures
≤ 31 °C)
For ambient temperatures U
T
between 31 °C and 40 °C, the maximum relative humidity value L
F
linearly decreases according to L
F
=
–(U
T
– 55) / 0.3:
Ambient temperature Max. rel. humidity
≤ 31 °C
80 %
33 °C 73.3 %
35 °C 66.7 %
37 °C 60 %
39 °C 53.3 %
40 °C 50 %
NOTICE
N8.0015
Humidity
High relative humidity

Electronic and mechanical components may be damaged.

The performance data alter to an unknown extent.

The relative humidity in the vicinity of the device should be kept as
low as possible.