background image

15

Power On/Off

Press the left-front knob (#1) to turn the unit on.  

RETROSOUND

 will appear on the screen. 

Press and hold the left-front knob (#1) to turn the unit off.  

GOODBYE

 will appear on the screen to confirm that it has turned off.

Volume

Rotate the left-front knob (#1) to adjust the volume between  
0-46 (minimum-maximum).

Mode

Rotate the left-rear knob (#2) clockwise to select from available 
listening sources: 

RADIO

AUX

. The auxiliary input (

AUX

) is located at 

the back of the radio body. The auxiliary input may be used to 
play music from any portable device with a standard headphone 
output, such as a MP3 player, iPod

®

 or iPhone

®

, portable CD player 

or portable satellite radio receiver. To use this input, the auxiliary 
cable must be routed to an accessible area during installation. 

Radio Tuning

Rotate the right-front knob (#8) to tune to the next or previous  
AM/FM frequency. 

NOTE: When the radio is tuned to a strong FM station, the stereo indicator will appear 
on the upper right corner of the LCD display (two oval circles).

Radio Bands

Rotate the right-rear knob (#9) counter-clockwise to toggle 
through the five radio bands (two AM and three FM).

OPERATING YOUR RADIO

Содержание CLASSIC































Отзывы: