RyśMKII
Page 3
Function mapping in Joystick/Pad/Keyboard operation mode
Joystick
Pad
Keyboard
9 + 10 - operation mode switch
Boot 4 - operation mode switch
1 - fire1
2 - fire2
3 - fire3
6 - autofire1
5 - autofire2
START - operation mode switch
X - fire1
O - fire2
[] - fire3
R2 - autofire1
L2 - autofire2
F1-F2 - operation mode switch
F1 scheme
A - left
W - up
S - down
D - right
O - fire1
P - fire2
F2 scheme
left arrow key
right arrow key
down arrow key
up arrow key
W - fire1
Q - fire2
Updating adapter’s firmware (Bootloader)
In order to update adapter’s firmware, one put the device into Bootloader mode. It should be performed by pressing (with
something pointed) the button located on adapter’s case and labelled
Bootloader
.
When pressing and holding the
Bootloader
button, one should connect the device via USB A-A cable to the PC running
Windows. After being recognized by Windows OS, adapter switches into
Bootloader
mode which is confirmed with
continuous pulsation of the
Status
LED.
The next required step is to launch on the connected Windows PC
RyśFlasher
application that will update firmware of the
adapter.
Bootloader
