48
User manual | Blue Vision Combi Ovens I
09 AUTOMATIC CLEANING
9.2 START WASH
1
ENTER THE WASHING MODE
2
SELECT THE APPROPRIATE MODE
3
AFTER STARTING THE CLEANING
PROGRAM, PRESS
Wait for the detergent insert prompt.
TO RETURN TO THE WASHING MODE
LIST, PRESS
When Start is pressed, the combi oven automatically checks that the
temperature inside the cooking chamber is not too high. If the temperature
is above 80°C, the automatic process for cooling the cooking chamber will
begin. If the temperature does not exceed 80°C or cooking chamber cooling
has finished, your appliance will prompt you to add detergent.
When handling the detergent, follow all rules for working with
chemical substances!
ADDING DETERGENT
•
Cut open the detergent bag at the place
indicated.
•
Pour the entire contents of the package on
to the drain lid at the bottom of the cooking
chamber. Most of the powder will fall through
into the drain hole.
•
close the combi oven door
The selected program will start automatically, and the screen will keep you
informed about the current status of the program and the washing time left.
After the washing program ends, a signal sound is made and a message
appears. Now, the combi oven is ready to be used again.
STOPPING THE WASHING PROGRAM PREMATURELY
You can interrupt the cleaning process during the main step with the
STOP
button shown on the screen. If you do this, the combi oven will ask if you
really want to stop it. If you confirm, the program will switch to rinse mode,
which lasts about 16 minutes. Then the washing process completely stops. If
you do not confirm the pause and press
No
, the process will continue where
it left off.
•
When the washing process has finished, check the cooking chamber.
Remove any remaining detergent by thoroughly rinsing with the hand
shower or washing with water. If this isn’t done, the stainless-steel
surface of the cooking chamber can distort and discolour when the
appliance is used at high temperatures. The warranty does not cover
damage caused in this way!
•
Do not wash the combi oven using equipment that works with high
water pressure.
•
If the combi oven won’t be used again after washing, we recommend
leaving the door ajar, for example overnight.
•
Dispose of the detergent package as usual, by putting it in a place
reserved for plastic bags.
•
Do not leave packages lying around freely accessible.
DESCALING THE COOKING CHAMBER
Lime scale removal is recommended when there are visible lime scale
deposits in the cooking chamber (a white layer of water scale). To descale the
combi oven, the special substance Vision Descaler must be used.
This substance is applied in the same way as Active Cleaner. The standard
package for Vision Descaler is a plastic bucket containing 25 bags of 150 g.
