19
RT95
UHF/VHF Two Way Radio
The time-out timer limits continuous transmitting time. When transmit time last over
programmed value, the transmitting will stop and emit a prompt.
1.
Enter FUNCTION MENU list, choose No.12 function
2.
Press [PUSH] button, the menu value in LCD turns to green color
3.
Turn channel knob to choose wanted setting.
1-30: 1-30 minutes range available by 1 minute/step
OFF: Turn off TOT function
4.
Press [PUSH] button or [P3] key to store setting and exit.
Once APO is activated, the transceiver will be automatically switched off when the pre-set
timer running out.
1.
Enter FUNCTION MENU list, choose No.13 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3.
Turn channel knob to choose wanted setting
30Min: Automatical power off after 30 minutes.
60Min: Automatical power off after 60 minutes.
120Min: Automatical power off after 120 minutes
OFF: Automatical power off function is off
4.
Press [PUSH] button or [P3] key to store setting and exit
This function uses to start repeater. It needs a certain intensity Pilot Frequency to start
dormant repeater. As usual, no need to send pilot frequency again once repeater started.
1.
Enter FUNCTION MENU list, choose No.14 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3.
Turn channel knob to choose wanted setting
1000Hz: Pilot frequency 1000Hz
1450Hz: Pilot frequency 1450Hz
1750Hz: Pilot frequency 1750Hz
2100Hz: Pilot frequency 2100Hz
4.
Press [PUSH] button or [P3] key to store setting and exit
1.
Enter FUNCTION MENU list, choose No.15 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3.
Turn channel knob to choose wanted setting
FAIL: Revers display
STAN: normal display
4.
Press [PUSH] button or [P3] key to store setting and exit.
7.12 TOT(Time Out Timer)
7.13 APO (Automatic Power OFF)
7.14 Pilot Frequency
7.15 DIR (LCD display direction setup)
