Retevis RT675, Руководство пользователя

Страница: 14 / 20

RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this may
damage the radio and may also cause you to exceed RF exposure limits. A proper
antenna is the antenna supplied with this radio by the manufacturer or an antenna
specifically authorized by the manufacturer for use with this radio, and the antenna
gain shall not exceed the specified gain by the manufacturer declared.
• DO NOT transmit for more than 50% of total radio use time, more than 50% of the
time can cause RF exposure compliance requirements to be exceeded.
• During transmissions, your radio generates RF energy that can possibly cause
interference with other devices or systems. To avoid such interference,turn off the
radio in areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic
radiation such as hospitals, aircraft, and blasting sites.
• Portable Device, this transmitter may operate with the antenna(s) documented in
this filing in Push-to-Talk and body-worn configurations. RF exposure compliance
is limited to the specific belt-clip and accessory configurations as documented in
this filing and the separation distance between user and the device or its antenna
shall be at least 2.5 cm.
• Mobile Device, during operation, the separation distance between user and the
antenna subjects to actual regulations, this separation distance will ensure that
there is sufficient distance from a properly installed externally-mounted antenna to
satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is designed for and classified as “Occu-
pational/Controlled Use Only”, meaning it must be used only during the course of
employment by individuals aware of the hazards, and the ways to minimize such
hazards; NOT intended for use in a General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is designed for and classified as
“General population/uncontrolled Use”.
RF Exposure Compliance and Control Guidelines and Operating
Instructions
To control your exposure and ensure compliance with the occupational/controlled
environment exposure limits, always adhere to the following procedures.
Guidelines:
• User awareness instructions should accompany the device when transferred to
other users.
10