2
Note: Remove the batteries before storing your radio
for extended periods of time. Batteries corrode
over time and may cause permanent damage to
your radio.
Turning Your Radio On and Off
After you installed batteries turn the radio on, the radio
chirps and the display briefly shows all feature icons
available on your radio. The display then scrolls through
the available channels and Interference Eliminator
Codes. Press and hold button turn the radio off.
Setting the Volume
- Press the up button to increase the speaker volume.
- Press the down button to decrease the speaker
volume.
- The speaker volume level is indicated by the number
1-8 displayed.
Setting a Channel
1. With the radio on, press , the current channel
flashes.
2. Press up or down button to set the channel.
3. Press PTT to confirm and save the channel setting.
Control Buttons
Use / to:
• Turn radio on/off
• Scan
Use UP/DOWN to:
• Adjust volume
• Scroll through menus
Installing the AA Batteries
Your radio uses 3 AA Alkaline batteries.
1. With the back of the radio facing you, there are a
secret button to release the battery cover and remove.
2. Install 3 AA Alkaline batteries as shown on the inside
of the battery compartment.
3. Re-cover the battery cover and press down to secure.
The walkie talkie can use a NiMH rechargeable battery
instead of 3 AA Alkaline batteries.
Battery Meter
The battery icon shows the battery charge level,
from full to empty . When the battery is empty, the
radio chirps periodically after releasing . The radio
powers off when the voltage drops below a predeterm-
ined level to protect the rechargeable battery life.
Getting Started
MENU
Product Features
Channel
1
2
3
4
5
6
7
8
9
10
11
Frequency
462.5625
462.5875
462.6125
462.6375
462.6625
462.6875
462.7125
467.5625
467.5875
467.6125
467.6375
Channel
12
13
14
15
16
17
18
19
20
21
22
Frequency
467.6625
467.6875
467.7125
462.5500
462.5750
462.6000
462.6250
462.6500
462.6750
462.7000
462.7250
