Retevis RB616, Руководство пользователя

Страница: 12 / 43

11
limits. A proper antenna is the antenna supplied
with this radio by the manufacturer or an antenna
specifically authorized by the manufacturer for use
with this radio, and the antenna gain shall not
exceed the specified gain by the manufacturer
declared.
• DO NOT transmit for more than 50% of total radio
use time, more than 50% of the time can cause
RF exposure compliance requirements to be
exceeded.
• During transmissions, your radio generates RF
energy that can possibly cause interference with
other devices or systems. To avoid such interfere-
nce, turn off the radio in areas where signs are
posted to do so.
• DO NOT operate the transmitter in areas that are
sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
• Portable Device, this transmitter may operate with
the antenna(s) documented in this filing in
Push-to-Talk and body-worn configurations. RF
exposure compliance is limited to the specific
belt-clip and accessory configurations as docum-
ented in this filing and the separation distance
between user and the device or its antenna shall
be at least 2.5 cm.
• Mobile Device, during operation, the separation
distance between user and the antenna subjects
to actual regulations, this separation distance will
ensure that there is sufficient distance from a
properly installed externally-mounted antenna to
satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is desig-
ned for and classified as “Occupational/Controlled
products, batteries, and accumulators
(rechargeable batteries) must be taken
to designated collection locations at the
end of their working life. Do not dispose
of these products as unsorted municipal
waste. Dispose of them according to the
laws in your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Indust-
rie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
RF Exposure Information
• DO NOT operate the radio without a proper
antenna attached, as this may damage the radio
and may also cause you to exceed RF exposure