Retevis RA15, Руководство пользователя

Страница: 17 / 22

collection locations at the end of their working life. Do not dispose of these
products as unsorted municipal waste. Dispose of them according to the
laws in your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
RF Exposure Information
•DO NOT operate the radio without a proper antenna attached, as this may damage
the radio and may also cause you to exceed RF exposure limits. A proper antenna is
the antenna supplied with this radio by the manufacturer or an antenna
specifically authorized by the manufacturer for use with this radio, and the
antenna gain shall not exceed the specified gain by the manufacturer declared.
•DO NOT transmit for more than 50% of total radio use time, more than 50% of the
time can cause RF exposure compliance requirements to be exceeded.
•During transmissions, your radio generates RF energy that can possibly cause
interference with other devices or systems. To avoid such interference, turn off the
radio in areas where signs are posted to do so.
•DO NOT operate the transmitter in areas that are sensitive to electromagnetic
radiation such as hospitals, aircraft, and blasting sites.
•Portable Device, this transmitter may operate with the antenna(s) documented in
this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is
limited to the specific belt-clip and accessory configurations as documented in this
filing and the separation distance between user and the device or its antenna shall
be at least 2.5 cm.
•Mobile Device, during operation, the separation distance between user and the
antenna subjects to actual regulations, this separation distance will ensure that
there is sufficient distance from a properly installed externally-mounted antenna to
satisfy the RF exposure requirements.
•Occupational/Controlled Radio, this radio is designed for and classified as
“Occupational/Controlled Use Only”, meaning it must be used only during the
course of employment by individuals aware of the hazards, and the ways to
minimize such hazards; NOT intended for use in a General population/uncontrolled
environment.
•General population/uncontrolled Radio, this radio is designed for and classified as
“General population/uncontrolled Use”.
15