Retevis RA15, Руководство пользователя

Страница: 12 / 22

Scan Channels
Select Channel
Scan Privacy Codes
Menu/Power
Channel Scan
Privacy Code Scan
Your micro TALK radio can automatically scan
channels.
To scan channels:
1.Press and release the Scan button until the Scan icon
and the channel numbers appear on the display.
2.Press and hold the Scan button to begin scanning
channels.
The radio ignores specific privacy codes while scanning
channels.
The Scan icon will continue to be displayed when scan is
on. Your radio will continue to scan all channels and stop
if an incoming transmission is detected. Your radio will
remain on that channel for 10 seconds.
During scanning (while receiving an incoming transmis-
sion), you can choose from the following:
a.Press and hold the Talk button to communicate on that
channel. Your radio will remain on that channel and
return to Standby mode.
b.Press the Channel Up or Channel Down button to
resume scanning channels.
c.Press and hold the Scan button to return to Standby.
Your radio can automatically scan the Privacy Code
(either CTCSS 01 through 38 or DCS 01 through 83)
within one channel. Only one set of privacy codes
(CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1.While in Standby mode, press and release the Scan
button twice (CTCSS) or three times (DCS) until the
CTCSS or DCS icon and numbers are flashing.
2.Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
The Scan icon will continue to be displayed when privacy
code scan is on. Your radio will continue to scan the
privacy codes and stop as an incoming transmission is
detected. Your radio will remain on that channel/privacy
code for 10 seconds.
10