Retevis J-388C, Руководство пользователя

Страница: 4 / 14

Start Guide
Installation the battery
1. Make sure your radio is turned OFF.
2. Remove the battery compartment door.
3. Install the 4 NiMH rechargeable battery or 4 AAA Alkaline batteries into the battery
compartment.
4.Replace the battery compartment door.
Basic radio operations
1. Press to turn on.
2. Press to enter the channel settings, the channel display pattern starts flashing,with
to select. Press PTT to confirm and exit.
3. Press twice to enter the setting. OFF for no code, 01~38 for CTCSS code,39-99 for
DCS code.
4. Press for 3 times to enter the Vox function selection. there are OFF,1,2.3 these 3 gear
sensitivity optional.
5. Press for 4 times to enter the CALL tone selection function. They are 01 to 10 sounds
available.
6. Press for 5 times to enter the key tone selection function, select the button when the
ON button will beep a tone, select the OFF button when there is no tone.
7. Press for 6 times to enter the launch end of the tone selection function, with to select.
select ON to release the PTT will have a tone, the opposite choice of OFF there is no tone.
8. Press for 7 times and exit can also press PTT to confirm the exit menu.
Note
：
It doesn’t has charging function, it can’t be charged directly through charger base and so on , it
only can be charged by a NiMH vrechargeable battery.
When installing the battery, please pay attention to the corresponding positive and negative
placement!
Battery METER
Tunning your Radio ON/OFF
1. To turn your radio ON ,press and hold button 3 seconds .
2. To turn your radio OFF,press and houd button 3 second again.
Adjusting the Volume
1. press the button to increase the speaker volume.
2. press the button to decrease the speaker volume.
3. The speaker volume level is indicated on the LCD displayed(1~8 Level).
indicates that battery is fully
indicates that battery is LOW
The LCD appears icon please replace batteries immediately.
02