background image

suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter  tout brouillage radioélectriq-ue subi, même si le 

brouillage est susceptible d’en compromettre le fonctionnement.

RF Exposure Information

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio 

and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied 

with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for 

use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer 

declared.

• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can 

cause RF exposure compliance requirem-ents to be exceeded.

• During transmissions, your radio generates RF energy that can possibly cause interference with 

other devices or systems. To avoid such interference, turn off the radio in areas where signs are

posted to do so.

• DO NOT operate the transmitter in areas that are sensitive to elect-romagnetic radiation such 

as hospitals, aircraft, and blasting sites.

• Portable Device, this transmitter may operate with the antenna(s) documented in this filing in 

Push-to-Talk and body-worn configurat-ions. RF exposure compliance is limited to the specific 

belt-clip and accessory configurations as documented in this filing and the separation distance 

between user and the device or its antenna shall be at least 2.5 cm.

• Mobile Device, during operation, the separation distance between user and the antenna 

subjects to actual regulations, this separation distance will ensure that there is sufficient distance 

from a properly installed externally-mounted antenna to satisfy the RF exposure requirements.

• Occupational/Controlled Radio, this radio is designed for and classi-fied as 

“Occupational/Controlled Use Only”, meaning it must be used only during the course of 

employment by individuals aware of the hazards, and the ways to minimize such hazards; NOT 

intended for use in a General population/uncontrolled environment.

• General population/uncontrolled Radio, this radio is designed for and classified as “General 

population/uncontrolled Use”.

RF Exposure Compliance and Control Guidelines and Operating Instructions

To control your exposure and ensure compliance with the 

u

ncontrolled 

e

xposure 

environment 

exposure limits, always adhere to the following procedures.

Guidelines:

• User awareness instructions should accompany the device when transferred to other users.

• Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

• Transmit no more than the rated duty factor of 50% of the time. To Transmit (Talk), push the 

Push to Talk (PTT) button. To receive calls(listen), release the PTT button. Transmitting 50% of 

the time, or less,is important because the radio generates measurable RFenergy exposure only 

when transmitting in terms of measuring for standards compliance.

• Transmit only when people outside the vehicle are at least the reco-mmended minimum lateral 

distance away from a properly installed according to installation instructions, externally mounted 

antenna.

•  When operating in front of the face, worn on the body, always place the radio in a Retevis 

approved clip, holder, holster, case, or body harness for this product. Using approved body-worn 

accessories is important because the use of Non-Retevis approved accessories may result in 

0

8

 

Содержание J-388C















Отзывы: