RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide
communications between two or more users over a distance. RF energy, which when used improperly,
can cause biological damage.
All Retekess radios are designed, manufactured, and tested to ensure they meet
government-established RF exposure levels. In addition, manufacturers also recommend specific
operating instructions to users of the radios. These instructions are important because they inform
users about RF energy exposure and provide simple procedures on how to control it. Please refer to
the following websites for more information on what RF energy exposure is and how to control your
exposure to assure compliance with established RF exposure limits: http://www.who.int/en/
Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires
users to be fully aware of and able to control their exposure to meet occupational requirements.
Exposure awareness can be facilitated by the use of a product label directing users to specific user
awareness information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess
user manual, or separate safety booklet includes information and operating instructions required to
control your RF exposure and to satisfy compliance requirements.
Radio License (if appropriate)
Governments keep the radios in classification, business radios operate on radio frequencies that are
regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK,
Bundesnetzagentur...).To transmit on these frequencies, you are required to have a license issued by
them. The detailed classification and the use of your radios, please contact the local government radio
management departments. Use of this radio outside the country where it was intended to be distributed
is subject to government regulations and may be prohibited.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party respon-sible for compliance may void
the user’s authority granted by the local government radio management departments to operate this
radio and should not be made. To comply with the corresponding requirements, transmitter
adjustments should be made only by or under the supervi-sion of a person certified as technically
qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services
as certified by an organization representative of the user of those services.Replacement of any
transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio
management depa-rtments equipment authorization for this radio could violate the rules.
Before using this radio, read this guide which cont-ains important operating
instructions for safe usage and RF energy awareness and control for compliance with
applicable standards and regulations.
FCC Requirements:
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation • This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the
radio equipment type is in compliance with the essential requirements and other relevant
provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the
WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available
at the following internet address: www.retekess.com.
• Disposal
The crossed-out wheeled-bin symbol on your product, litera-ture, or packaging reminds you that in the
European Union, all electrical and electronic products, batteries, and accumu-lators (rechargeable
batteries) must be taken to designated collection locations at the end of their working life. Do not
dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your
area.
IC Requirements:
Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation
of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may
also cause you to exceed RF expos-ure limits. A proper antenna is the antenna supplied with this radio
by the manufacturer or an antenna specifically authorized by the manuf-acturer for use with this radio,
and the antenna gain shall not exceed the specified gain by the manufacturer declared.
• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF
exposure compliance requirements to be exceeded.
• During transmissions, your radio generates RF energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do
so.
• The device complies with RF specifications when the device used at 5mm from your body. Third-party
belt-clips, holsters, and similar acc-essories used by this device should not contain any metallic
compon-ents. Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
●SET ALERT LENGTH
：
From 1 to 30 (seconds)
●SET RESET BY CHARGER/ SET RESET NO CHARGER
●SET LOGO
●SET FLASH RESET BY CHARGER DISABLE/ SET FLASH RESET BY CHARGER ENABLE
●SET OUT OF RANGE TIME(2-9):
From 2-9
（
Minute
）
●SET OUT OF RANGE ALERT INTERVAL TIME(1-9):
From 1-9
（
Minute
）
●SET CHECK RSSI ENABLE/ SET CHECK RSSI DISABLE
●SET OUT OF RANGE DISABLE
●SET ZOOM 1/SET ZOOM 2/SET ZOOM 3
Brief description
：
Ⅴ
(drop-down key) →"Words"→
∧
/
Ⅴ
(Up / Down to select function) →"SEND"→Show "SET " all→
Succeeded.
Tips
：
The pagers must be placed on the charging base and paired before doing the settings.
If you want to use a function, press the“SEND”button to set it when it appears, and the“SET”will display
on the pagers if the function is set successfully.
All the above functions which displayed or not displayed in the setting mode could be changed by
software.
3
4
