RXiBreeze PAP System User Manual
34
16 EMC Declaration
Essential Performance
：
CPAP mode: work pressure 10 cmH
2
O.
The CPAP system is intended for use in the specified electromagnetic environment
listed in form A-1, A-2 and A-3. The customer or the user of CPAP system should
assure that it is used in such an environment as described below.
The CPAP system is intended for use in an electromagnetic environment in which
radiated RF disturbance are controlled. The customer or the user of CPAP system can
help prevent electromagnetic interference by maintaining a minimum distance between
portable/mobile RF communications equipment (transmitters) and the CPAP system
(as recommended in form A-3) , according to the maximum output power of the
communications equipment.
Form A-1 Guidance and Declaration - Electromagnetic Emissions
Emissions test
Compliance
Electromagnetic environment -
guidance
Radiated emissions
CISPR11
Group 1
The CPAP system uses RF
energy only for its internal
function. Therefore, its RF
emissions are very low and are
not likely to cause any
interference in nearby electronic
equipment.
Conducted emissions
CISPR11
Class B
The CPAP system is suitable for
use in all establishments,
including domestic
establishments and those
directly connected to the public
low-voltage power supply
network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC61000-3-3
Complies
