Restech PLT MOORING 150, Руководство пользователя

Страница: 4 / 18

PLT

 

LINE THROWER
4
HOW TO USE MOORING 150
1 . Screw the launching tube on to the base unit (fig 1,1).
2 . Make sure that the line is well fastened to the loop on the
projectile.
3.Turn the handle of the closing valve (fig 1.2). You will hear
the air flow in to the accumulator. Shut the closing valve
after 5 - 10 seconds. If a shorter shooting distance is
needed, fill somewhat less air in to the accumulator before
closing the closing valve.
4
. Insert the line in to the line track along the projectile.
Insert the projectile all the way down in to the launching
tube (fig 2).
5 . Fasten the end of the line to a solid point at the launching
site. If a line box is used, hold the line box with the same
hand used for pulling the safety knob.
6 . Aim over the target with an angle of approx. 27
°
. Make
sure that the PLT
®
is well supported with a Pivot Support or
by using the rear end of the PLT
®
as a hold (fig 2).
7 . Push the safety knob (fig 3.1). Pull the trigger with a firm
and rapid movement (fig 3.2). The projectile will now be
launched.
Please also study the CD and users manual
labelled on the PLT
®