PLT
LINE THROWER
15
PIVOT SUPPORT
Fig 1 Fig 2
Due to the heavy recoil it is necessary to have a good
support for the PLT
. The back of the PLT
®
can be used as
support.
But we will recommend use of the Pivot Support (fig 1). With
the Pivot Support come pivot pins, nylon washers and
screws for fastening it to the PLT
®
according to fig.3 on next
page.
A steel tube shown on fig 2 shall be welded or clamped at
the launching area (rail, i.e.), to a secure point that
withstands recoil up to 5300 N. Tubes can be installed at
different places on board.
Art no 1502 Pivot Support incl. pivot pins, nylon washers
and screws.
Art no 1503 Tube for Pivot Support.
Содержание PLT MOORING 150
Страница 5: ...PLT LINE THROWER 5 Fig 1 Fig 2 Fig 3...
Страница 10: ...PLT LINE THROWER 10...
