www.response-technologies.com
- 14 -
©Response Technologies, Ltd.
Revised: January 9, 2015
Section 5
Console Configuration
HISTORY LOG
The HISTORY LOG is updated with important system information such as, sensor
activation, missing sensors, sensor tampering, and battery notifications for sensors (see
History log Event descriptions below).
Click on the History Log button to open the log in a separate window. History Log can then be
saved to disk or printed out.
History Log (Date, Time, Sensor ID, and Event) is a log of
SCOUT
system activities. The last
100 events are stored in a circular nonvolatile buffer. When the number of events exceeds 100,
the oldest stored events are overwritten.
History log Event descriptions:
“SCOUT ON”
SCOUT
turned on
“SCOUT OFF”
SCOUT
turned off
“SCOUT ARMED”
SCOUT
armed and ready for sensor activation
“SCOUT DISARMED”
SCOUT
disarmed and configurable
“SCOUT DATE/TIME SET”
SCOUT
system clock adjusted by user
“SCOUT OPERATING ON A/C POWER”
SCOUT
is running on AC power
“SCOUT OPERATING ON D/C POWER”
SCOUT
is running on internal or external battery
“SCOUT BATTERY LOW”
SCOUT
system battery power is low
“SCOUT RESET TO DEFAULT CONFIGURATION”
SCOUT
settings were reset back to default
“USER CONFIG WAS CHANGED THROUGH CONSOLE”
SCOUT
settings were saved using console
“SENSOR TRIGGERED”
SCOUT
alarm activated by Sensor ID shown
“INPUT RELAY TRIGGERED”
SCOUT
alarm activated using the Input Relay
“SENSOR BATTERY LOW”
Sensor battery is low for Sensor ID shown
“SENSOR MISSING”
Sensor ID shown missed the check in at the time
shown
“SENSOR RETURNED”
Sensor ID shown checked in after missing a
previous check in
“SENSOR RESET”
Internal “reset” button was pressed in Sensor ID
shown
“SENSOR TAMPERED”
Sensor ID shown was tampered