Respirex GLS 300 A, Инструкция пользователя

Страница: 5 / 14

3
Dressing Procedure
It is good practice for an assistant to help the wearer don and doff the suit. This makes the process easier and
quicker, and will help the wearer to avoid stumbling or tripping which may result in personal injury or damage
to the suit.
Follow these steps in donning the suit:
1. Unfasten the zipper by pulling the slider approximately 6 cm (2.4”) at a time, keeping the zip straight with
one hand as you pull the slider with the other in line with the zip. Repeat this exercise for the whole length
of the zip. FAILURE TO FOLLOW THIS PROCEDURE MAY RESULT IN THE ZIP SPLITTING.
2. Remove all personal affects which may result in damage to the suit (e.g. watches, badges, jewellery etc.).
3. Remove shoes or boots. The integral bootees are not designed to accommodate footwear.
4. Tuck trousers into socks to make donning of suit legs and bootees easier.
5. While seated, carefully place each leg in turn into the suit then fold the outer legs (splash guards) upwards
over the knees (see Fig. 1 and Fig. 2).
6. Don safety boots. It is strongly recommended that you wear a larger size of boot than normal (ideally at
least one size larger), not only to accommodate the surplus fabric of the integral bootee, but also to ease
in the donning process (see Fig. 3 and Fig. 4).
Fig. 1
Fig. 2
Fig. 3 Fig. 4