•
Materials that may come into contact with the wearer’s skin are not known to cause allergic reactions to
the majority of individuals (please see glove user instructions). These products contain no components
made from natural rubber latex.
•
Continuous contact with certain chemicals can adversely effect the field of vision and protection offered
by the visor. If the end-user notices any discolouration of the visor the suit should be withdrawn from use.
•
The GLS 300 A suit DOES NOT provide protection against heat or flame, it should therefore not be worn
in potentially flammable or unassessed explosive environments. It is not to be used in the handling of
explosives.
•
To achieve proper electrostatic dissipative performance, the person wearing the suit shall be properly
earthed. The resistance between the person and the earth shall be less than 10
8
Ω, e.g. by wearing
adequate footwear.
•
Electrostatic dissipative clothing should not be worn in oxygen enriched atmospheres without prior
approval by a responsible safety engineer.
•
The electrostatic dissipative performance of the suit can be affected by wear and tear and possible
contamination.
•
When selecting boots it is recommended that consideration be given to their compatibility with the
electrostatic properties of the suit.
•
Barrier Laminate material does not breathe. The wearer’s body temperature will rise whilst wearing the
suit and care should be taken not to lose too much body fluid. The wearer should leave the work area
and remove the suit before becoming distressed.
For any enquiries please contact the Respirex customer services department on
Tel : +44 (0)1737 778600 or Fax : +44 (0)1737 779441.
Email: http://www.respirexinternational.com/en/about-us/contact-us/
Storage
The GLS 300 A suits should be stored under the following conditions:
In dry conditions above ground level; away from direct sunlight and in an environment free from harmful gases
and vapours.
Temperature range of -5°C* to +30°C, < 90% humidity.
*Care should be taken when storing the suits at extreme temperatures. At sub-zero temperatures the flexibility
of the material may be reduced, resulting in a potential lowering of the protection offered.
Only remove the single-use GLS 300 A suit from its original packaging when intending to use.
DO NOT fold or crease the visor, this will help to keep its natural shape.
Pre-checks
1. Visually inspect the suit for any damage that may impair the correct working of the garment together with
the gloves.
2. The zip operates correctly and the slider is in good condition.
3. The suit materials are free from tears and holes. Pay particular attention to the seam areas.
4. Check vision through the visor is not impaired by scratches or heavy scuff marks.
2
Содержание GLS 300 A
Страница 14: ...Glove User Instructions ...
