Respekta PYRO 9 TOUCH, Инструкции по эксплуатации и монтажу

Страница: 67 / 71

30
 When install oven door, make sure both hinge plug into opening
mouth directly.
 Both sides of hinge rabbet must bite up each other.
 When open the door, spread down locking rod(picture B)
If the door drop accidently or hinges shut up suddenly, do
not push you hand in hinges. Please call your after-sell
department.
Remove and install door panel
Remove
 Remove oven door, put it on a piece of cloth.
 Using one hand to push the outside glass, the other hand to
pull the inside glass, hold the glass then pull out the glass. (C)
Notice! Dangerous!
If the glass has some scratches, it may lead to crack.
Don’t use the glass spatula, acute and corrosive cleaning product or detergent to clean the
glass.
Install
 Plug the inner glass into glass pressure groove.
 Both right and left sides need put down alignment to card slot and push the glass to its
place.
 Put on the oven door.
Remove and install side shelves
In order to clean sides of oven, you should remove the side
shelves to clean the oven
1. Downward the shelf and pull it out (picture D)
2. Lift up the side shelf to level and pull it out.
Do not use the oven before correctly assemble the oven door.
Replacing the oven lamp
If the bulb in the oven Light fails, it must be replaced. Risk of electric
Shock!
Switch off the circuit breaker in the fuse box.
 Place a tea towel in the oven when it is cold to prevent damage.
 Unscrew the glass cover by turning it anti-clockwise.
 Replace the bulb with one of the same type.
 Screw the glass cover back in.
 Remove the tea towel and switch on the circuit breaker.