IN
STA
L
L
G
U I D E
I
Smoke Alarm
is a fire-protection device
that alarms when it detects smoke or
temperatures above 135°F (57°C).
Features
• UL217 and ULC531 listings
• Smoke and heat detection
• 5 year warranty
Quick Start Guide
1. Remove the mounting plate.
2. Pull the battery tab.
3. Restore the mounting plate and
twist it fully onto the smoke alarm.
Note: Enrollment is possible
only
if the mounting plate is twisted
onto the smoke alarm.
4. Enroll the smoke alarm by placing
the panel into wireless enrollment
mode and then holding down the
smoke’s test button until the smoke
alarm beeps.
5. Remove the mounting plate and
refer to
Sections 2 and 6
for
positioning and installation.
6. After mounting plate is installed
restore the smoke alarm onto the
mounting plate and fully test the
smoke alarm per
Section 7
.
To replace the battery,
detach the
smoke alarm from its mounting plate
and replace the batteries.
Attention
This manual should be read prior to use and retained for further information.
Verify proper enrollment and operation using your security panel’s installation manual.
Test Smoke Alarm
Pull Battery Tab
Position Smoke Alarm
12 inches
minimum
12 inches
minimum
RE314 DSC
®
Compatible Smoke and Heat Alarm
