IN
STALL
G
U I D E
I
CO Alarm
is a life-safety device that
alarms when it detects carbon
monoxide.
Features
• UL2034 and CSA 6.19-01 listings
• Detects carbon monoxide
• 5 year warranty
Key Instructions
1
.
Review
sections 1 and 2
for
information regarding the CO alarm.
2.
Determine where to place the CO
alarms per
Section 3.
3.
Install per
Section 4.
Cryptix Enrolment:
4.
Enroll the CO alarm into the panel:
• Place panel in enrollment mode
• Press and hold TEST button until you
hear the sounder beep
• The panel will learn the CO alarm
• Press and hold TEST button until
sounder is done sounding beeps
• Panel will indicate a CO Test by
sounding temporal 4 siren one time
Interlogix Compatible Enrollment
•
Place panel in enrollment mode
• Press and hold TEST button until
sounder is done sounding beeps
• Panel will learn the CO alarm-
recommended group 34
• Test that the CO alarm is enrolled in
the panel:
• Put panel into test mode
• Press and hold TEST button until
sounder is done sounding beeps
• Panel will indicate a CO sensor has
tripped
Attention
This manual should be read prior to use and retained for further information.
Use the Helix installation guide to verify proper system setup.
CO Alarm
CARBON
MONOXID
E
ALARM
ALARM
FAULT
POWER
Red
Light
Amber
Light
Green
Light
Test
Button
