Resol WMZ Plus, Руководство по установке и эксплуатации, Страница: 20 / 24

20
en
Î To skip the update, select No.
The devices starts normal operation.
Note
The device will only recognise a firmware update file if it is stored in a
folder named RESOL\WMZ on the first level of the MicroSD card.
Î Create a folder named RESOL\WMZ on the MicroSD card and ex-
tract the downloaded ZIP file into this folder.
Starting the logging
1. Insert the MicroSD card into the slot.
2. Adjust the desired logging type and interval.
Logging will start immediately.
Completing the logging process
1. Select the menu item Remove card...
2. After Remove card is displayed, remove the card from the slot.
When Linear is adjusted in the logging type adjustment channel, data logging will
stop if the capacity limit is reached. The message Card full will be displayed.
If Cyclic is adjusted, the oldest data logged onto the SD card will be overwritten as
soon as the capacity limit is reached.
Note
Because of the increasing size of the data packets, the remaining logging
time does not decrease linearly. The data packet size can increase, e.g. with
the increasing operating hours value.
Saving adjustments
Î
To store the adjustments on the MicroSD card, select the menu item Save
adjustments.
While the adjustments are being stored, first Please wait, then Done! will be indi-
cated on the display. The adjustments are stored as a .SET file on the MicroSD card.
Loading adjustments
1. To load adjustments from a MicroSD card, select the menu item Load ad-
justments.
The File selection window will appear.
2. Select the desired .SET file.
While the adjustments are being loaded, first Please wait, then Done! will be
indicated on the display.
Note
To safely remove the MicroSD card, always select the menu item Remove
card
…
before removing the card.
13 User code
In the User code menu, a user code can be entered. Each number of the 4-digit
code must be individually adjusted and confirmed. After the last digit has been con-
firmed, the menu automatically jumps to the superior menu level.
To access the menu areas of the installer level, the installer user code must be
entered:
Installer: 0262
If the installer user code has been entered, the device changes to the parameteri-
sation mode, see page 10.
Note
For safety reasons, the user code should generally be set to the customer
code before the device is handed to the customer!
Customer: 0000
If a parameter of the installer level is to be changed without previously having en-
tered the user code, the user code enquiry appears. Only if the installer user code
has been entered, can the parameter be changed.