WMZ-G1
© RESOL_10096
WMZ-G1.mon
us.ind
d
9
|
Signal 1
Select and adjust the parameters and values for
the selected
sensor
•
Auto-detect...
Start automatic sensor identification
If you select auto-detect, the sensor identifies itself:
type and sensor range are transmitted to the device. If
no automatic detection is possible, the type and range
of the sensor can be adjusted manually.
•
Type
:
Select the sensor type by choosing between:
Off: no sensor type is selected
VFS: Flow rate sensor: sensor for detecting flow rate
RPS: Relative Pressure Sensor: sensor for detecting
relative pressure
DPS: Differential Pressure Sensor: sensor for detecting
differential pressure
•
Range:
Select the sensor range.
The range depends on the previously selected sensor
type (see tables to the left).
Sensor 1
Auto-detect...
Type
RPS-...
Range
0-0.6 bar
VFS Range:
Custom:
Min: 1-19.99 l/min, Max: 1.01-600.00 l/min
1-20 l/min
2-40 l/min
5-100 l/min
10-200 l/min
20-400 l/min
RPS Range:
Custom:
Min: 0.00-39.99 bar, Max: 0.01-40.00 bar
0-0.6 bar
0-1 bar
0-1.6 bar
0-2.5 bar
0-4 bar
0-6 bar
0-10 bar
0-16 bar
0-25 bar
0-40 bar
DPS Range:
Custom:
Min: 0.00-15.99 bar, Max: 0.00-16.00 bar
0-0.6 bar
0-1 bar
0-1.6 bar
0-2.5 bar
0-4 bar
0-6 bar
0-10 bar
0-16 bar
Adjust the parameters referring to temperature (signal 1):
•
Unit
:
Select the unit of temperature. A selection can be made
between ° C and ° F.
•
Offset:
A sensor offset can be carried out.
Adjustment range: -99.9 ... 99.9 ° C or ° F
•
Min Alarm:
If the minimum temperature is reached, the relay is
energized,
appears in the display, the LED flashes
green and an alarm message appears in the submenu
“Reports”.
Î
Select “Yes” or “No” to activate or deactivate the
function.
If this function is selected, the minimum value for the
alarm has to be adjusted.
Adjustment range: -888.8 ... 999.9 ° C or ° F.
•
Max Alarm:
If the maximum temperature is reached, the relay is
energized,
appears in the display, the LED flashes
green and an alarm message appears in the submenu
“Reports”.
Î
Select “Yes” or “No” to activate or deactivate the
function.
If this function is selected, the maximum value for the
alarm has to be adjusted.
Adjustment range: -888.8 ... 999.9 ° C or ° F.
Adj. values:
Temperature
unit
° C
offset
0.0 ° C
min alarm
yes
min
0.0 ° C
max alarm
yes
max
100.0 ° C
Sensors 1 and 2
