23
en
Installation
Commissioning
Settings
Tr
oubleshooting
Data comm
unication
7
Basic settings
In the Basic settings menu, all basic parameters for the controller can be adjusted.
Normally, these settings have been made during commissioning. They can be subse-
quently changed in this menu.
Basic settings
Adjustment
channel
Description
Adjustment range / selection
Factory
setting
Language
Selection of the menu language Deutsch, English, Français, Español,
Italiano
Deutsch
Auto DST
Daylight savings time selection Yes, No
Yes
Date
Adjustment of the current date 01.01.2001 … 31.12.2099
01.01.2014
Time
Adjustment of the current time 00:00 … 23:59
-
Reset
back to factory setting
Yes, No
No
8
SD card
The controller is equipped with a MicroSD card slot for MicroSD memory cards.
With a MicroSD card, the following functions can be carried out:
• Logging measurement and balance values. After the transfer to a computer, the
values can be opened and visualised, e. g. in a spreadsheet.
• Store adjustments and parameterisations on the MicroSD card and, if necessary,
retrieve them from there.
• Running firmware updates on the controller.
Running firmware updates
When a MicroSD card with a firmware update is inserted, the enquiry Update? is
indicated on the display.
Î
In order to run an update, select Yes and confirm with the right button (
✓
).
The update is run automatically. The indication Please wait and a progress bar
appear on the display. When the update has been completed, the controller will
automatically reboot and run a short initialisation phase.
Note:
Only remove the card when the initialisation phase has been completed
and the status menu is indicated on the controller display!
Î
To skip the update, select No.
The controller starts normal operation.
Note:
The controller will only recognise a firmware update file if it is stored in a
folder named WUES on the first level of the MicroSD card.
Î
Create a folder named WUES on the MicroSD card and extract the
downloaded ZIP file into this folder.
Starting the logging
Î
Insert the MicroSD card into the slot.
Î
Adjust the desired logging type and interval.
Logging will start immediately.
Completing the logging process
Î
Select the menu item Remove card...
Î
After Remove card is displayed, remove the card from the slot.
When Linear is adjusted in the Logging type adjustment channel, data logging
will stop if the capacity limit is reached. The message Card full will be displayed.
If Cyclic is adjusted, the oldest data logged onto the SD card will be overwritten as
soon as the capacity limit is reached.
Note:
Because of the increasing size of the data packets, the remaining logging
time does not decrease linearly. The data packet size can increase, e. g. with
the increasing operating hours value.
Storing controller adjustments
Î
To store the controller adjustments on the MicroSD card, select the menu item
Save adjustments.
Содержание DeltaTherm HT
Страница 30: ...en 30 ...
Страница 31: ...en 31 ...
