manualshive.com logo in svg

Resol DeltaSol SL, Руководство пользователя

Поделиться
Скачать
Resol DeltaSol SL Скачать руководство пользователя страница 69

en

69

69

en

26

OSDC 26

PUSH

SAVE
Display: YES, WAIT, SUCC, NOCRD 
Factory setting: YES

NOCRD

LOAD
Display: YES, SLxx, WAIT, SUCC, NOCRD 
Factory setting: YES

LOGI
Logging interval 
Adjustment rang 00 … 20:00 … 59 
Factory setting: 01:00

REMC
Display: YES, SUCC 
Factory setting: YES

LLOG
Linear logging 
Adjustment  range:  ON / OFF 
Factory setting: OFF

FORM
Display: YES, WAIT, SUCC 
Factory setting: YES

26  MicroSD card

The controller is equipped with a MicroSD card slot for MicroSD memory cards.
With a MicroSD card, the following functions can be carried out:
•  Logging measurement and balance values. After the transfer to a computer, the 

values can be opened and visualised, e. g. in a spreadsheet.

•  Store adjustments and parameterisations on the MicroSD card and, if necessary, 

retrieve them from there.

•  Running firmware updates on the controller.

While a MicroSD card is being used, the symbol 

COM

 will be displayed. If the 

MicroSD card is full, 

COM

 will start flashing.

Running firmware updates
The current software can be downloaded from www.resol.de/firmware.
After  a  MicroSD  card  with  a  firmware  update  has  been  inserted,  the  enquiry 
UPDA will be indicated on the display. 

 

Î

In order to run an update, select YES and confirm with the right button.

The update is run automatically. The indication UPDA and the progress in % will 
appear on the display. When the update has been completed, the controller will 
automatically reboot and run a short initialisation phase.

 

Î

To skip the update, select NO.

The controller commences normal operation. 

Note:
The controller will only find a firmware update on a MicroSD memory 
card when it is stored in a folder named "RESOL / SL".

 

Î

Create a folder named "RESOL" on the SD card, create a sub-folder 
"SL", and extract the downloaded ZIP file into this folder.

27

Card inserted,  
formatted,  
recognised, not full,  
not write-protected

No card

BACK

PUSH

Содержание DeltaSol SL





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды